Monster Drum is a collaboration of multiple indonesian producers and comes with multiple kits & routable outputs for Win 32/64 bit & MacOS.
Circuit-modeled analog saturation effect developed by Philipp Bulling (aka phi-L Audio).
Tube Preamp emulates the distortion characteristics of an analog tube amplifier while letting the user customize the simulated tube circuit.
Tube Preamp stands out as one of the most “tweakable” saturation plugins on the market. You can manually adjust and fine-tune almost every virtual component of the modeled tube circuit.
The user can quite easily edit the values of the simulated capacitors, resistors, and other components. Each component is controlled by a tiny knob that directly adjusts its value.
https://ddmf.eu/phi-L-Audio-Tube-Preamp/
Clon Minotaur Transparent Overdrive is modeled on The Klon Centaur* a guitar overdrive pedal developed between 1990 and 1994. The Clon Minotaur is characterized as a "transparent" overdrive, meaning it adds gain to the signal without significantly altering the tone of the guitar.
Depending on the settings of the control knobs, the Clon Minotaur Transparent Overdrive can act mostly as a clean boost, adding mostly volume and minimal coloring to the sound. This can be used to drive the input valve stage of the virtual amplifier to use the characteristic distortion sound of an overdriven guitar amp.
https://www.nembriniaudio.com/products/clon-minotaur-transparent-overdrive
TAL-Filter-2 is a host synced filter module with different filter types, panorama and volume modulation possibilities. This can be used for tremolo or trance gate effects. Panorama modulation maybe is useful to pan your percussion, hats or sound effects in the stereo room for more interesting rythms and sounds.
https://tal-software.com/products/tal-filter
sweepDelay it's an advanced delay with two resonant filters that are modulated in frequency. Extremely low resources taken!
Use sweepDelay if you want your delay to sound special.
SpikeQ is a frequency based transient shaper.
As a distant cousin of Drum Snapper, it features the same attitude for increasing the Attack of a source, but expands it with the ability to enhance certain frequency areas on the attack portion of a sound.
Do you have a source that is too buried in a mix?
Do you want to make certain frequencies pop?
SpikeQ enables you to add huge boosts of eq but not making them too boomy and loose (in the low end) or too splashy (in the high end).
T-Force Delay is a dual mode delay effect device. It can be used to add an echo effect to your sound. Its feedback signal can be modulated with filters and a degrader, to emulate the old vinage style analog tape echo effects. It can produce simple stereo delays, but also can be switched to ping pong mode for that typical left/right pingpong echo effect. it also has a flanger to create some crazy flanger effects on the feedback signal.
https://mastrcode-music.de/en/vst-plugins/t-force-delay/
Burier is a saturation/filter combo.
Burier has a large central “BURY” knob controlling the amount of saturation applied. Below that is a mix dial to blend the wet/dry signal, an output dial, and a link switch that links the output gain to the BURY level. When linked, the output dial will adjust automatically to compensate for any level adjustments you make. The filter section features IIR (Infinite Impulse Responses) low cut and high cut filters.
https://kitplugins.com/products/burier
PCM2612 Retro Decimator Unit is a free bitcrusher effect. It is based on Inphonik’s previously released RYM2612 Iconic FM Synthesizer plugin, which emulates the Sega Genesis sound chip.
The PCM2612 is based on the PCM playback feature of Inphonik’s RYM2612 Iconic FM Synthesiser. The RYM2612 is an emulation of Yamaha’s YM2612 sound chip famously used in the Sega Genesis.
The PCM2612 has a large central knob that controls the amount of 8-bit decimation applied to the source. Below is a mono switch, a dry/wet mix knob, and an output filtering switch. The output filtering switch lets you choose between the Crystal Clear digital output and the Legacy line output of the Sega Genesis Model 1 output circuit.
https://www.inphonik.com/products/pcm2612-retro-decimator-unit/
Track24 focuses on tape saturation without the more mechanical artifacts like wow/flutter.
Technically, that should mean you get the warmth without any of the other noise. Track24 has a tone section offering four different filter presets inspired by two different tape machines.
Type I is a preset created from a Swiss-made tape machine running at 30ips. The second preset, Type II is based on a Japanese tape machine running at 30ips. The same Japanese machine was used to create Type III, this time running at 15ips. There is a Neutral preset, which is a completely flat response.
Texture slider: When you apply saturation, you are adding harmonics that warm or thicken the original tone. There are even and odd harmonics, and some analog gear will add more evens than odd or vice versa. In simple terms, even harmonics can feel like adding warmth, support, and stability, much like playing octaves on a keyboard. Odd harmonics can be a bit brighter and grittier. Being able to control that texture with a simple slider is a nice touch.
You also get a pair of high and low-pass filters that are pre-saturation, which means they are shaping the incoming signal. There is a 4X oversample button to help avoid aliasing, although it may introduce slight latency issues. Lastly, there is a dry/wet mix control to blend the clean and saturated signals.
https://lowwavestudios.com/track24/
FreeverbToo is a studio-quality reverb plugin based on the Schroeder/Moorer algorithm.
The Big Apple plugin is a feed-forward dynamic range compressor based on the ideal VCA mathematical model. This audio processor allows you to use the parallel compression mixing technique (also known as New York compression) in your everyday work. The parallel compression works inline without any additional routing inside your DAW.
The "Big Apple" plugin also available as a simple unit!
https://hasound.com/products/bigapple/
Harmonic enhancer.
Chorus GAS consists of four independent modules of delay lines, which are tuned to the required notes from the full MIDI range (from C0 to G10), which allows you to get quite interesting combined effects - chorus, flanger, phaser, vibrato, etc., within one plug-in. Thanks to the tuning of the delay lines to the key, quite interesting types of tonal choruses and flangers are realized, imitating interval, chord, pentatonic and other sound combinations that cannot be realized through other effects. Another distinctive feature of this effect is the presence of an adjustable high-pass filter in the feedback loop, which gives a peculiar flavor to the sound, reminiscent of flight.
http://stone-voices.ru/vst/chorus_gas?lang=en
HY-ESG is a gate sequencer (aka a trance gate effect) with a twist. It uses a Euclidean sequencer instead of the standard step sequencer seen in most other trance gate plugins.
HY-ESG is a gate sequencer. Its sequencer module controls the gate effect, which uses an ADSR envelope to modulate the volume. It can add rhythm and movement to static sounds.
To make things more interesting, HY-ESG substitutes the standard grid-based step sequencer with a Euclidean sequencer, unleashing the age-old rhythm-generating powers of ancient Greek mathematical algorithms in the comfort of your DAW.
https://sellfy.com/bedroomproducersblog/p/hy-esg/
Flux Mini is an audio effect that adds life, character and dynamism to your tracks. The customisable graph creates a shape which affects either the amplitude, low-pass filter or high-pass filter. You can emphasise the frequency modulation with the resonance knob too!
Pre-loaded with 20 presets to get you going, it won't be long before you've built a plethora of shapes to accentuate your fantastic music. From simple side-chains to manic modulations, sculpt some life into your sounds
https://www.caelumaudio.com/CaelumAudio/?Page=FluxMini
The 4U plugins are a collection of free tools directly from the HOFA-Studios.
beatassist.eu has released Kuma 508, a free FM synth plug-in for macOS and Windows that features 5 oscillators and a noise generator.
There are 5 FM algorithms and 3 Single Osc modes. Kuma 508 has the possibility to play among 22 extra waveforms per Oscillator. The plugin has 4 filters that can be connected as a modular synth VIA patch cables. There is also a basic but effective Reverb inside Kuma 508.
https://www.beatassist.eu/kuma508.htm
Wave Destroyer is an audio distortion plugin capable of a massive range of tones.
The distortion character is endlessly tweak-able thanks to a unique compliment of controls as well as independent pre and post EQ sections.
It can be used subtly as a saturator and exciter or it can be a tool of ultimate sonic destruction. Overdrive, distortion, fuzz, glitchy broken tones, and anything else you can dream up; its all possible with Wave Destroyer.
https://freevstplugins.net/gmh-audio-wave-destroyer/
Giant Verb is an analog-inspired reverb effect optimized for low CPU consumption. The plugin emulates the behavior of analog hardware reverbs, in the sense that the input stage can be overdrive to warm up the signal. At the same time, the plugin is optimized to run smoothly even on slower computers that don’t boast the latest specs.
Another interesting feature is the reverb modulation. Add some modulation to the reverb signal to simulate irregular spaces like caverns and cavernous halls. This type of reverb works especially well for epic vocals and choir sounds.
https://sites.google.com/site/digitalsystemic/home/giant-verb
FirComp is a zero-latency compressor designed to sound musical and transparent. The plugin can handle fast attack settings (down to zero milliseconds!) with a high compression ratio. It sounds clean at moderate settings while applying gentle distortion at high compression levels.
The plugin was designed to add punch without distorting the signal. On the other hand, FirComp also features an optional look-ahead feature for smooth compression on instrument busses and the master channel. It delivers transparent compression.
FirComp is well-optimized for low CPU consumption.
https://jonvaudio.com/fircomp/
Whereas the TLS 1295 LEA plugin does borrow its core functionality from the original LA-2A units, it adds numerous added features and workflow enhancements. The user can fine-tune almost every parameter, from the envelope timing and saturation level to the side-chain high-pass filter and dry/wet mix levels.
The plugin also features a gain reduction meter, a clipping indicator, copy/paste functionality, A/B testing, and built-in MIDI learn. Select any parameter and assign a MIDI CC to it.
https://www.kvraudio.com/forum/viewtopic.php?f=6&t=558511
