ISOL8 mix monitoring tool

 ISOL8 v1.0.4 free mix monitoring tool 

Isol8 is an advanced mix monitoring tool. It divides the frequency range into 5 bands.

These 5 bands can be soloed or muted individually. This will help you to concentrate on certain frequency ranges during the mixing and mastering process.

Isol8 is originally designed to be used on the master track, but it can also be used on individual audio track busses.

 5 adjustable frequency bands
- Solo/mute function for each band individually
- Linkwitz-Riley crossover filter design
- 24/48dB/Oct filter slope
- Multiple filter channel modes (Stereo/Left/Right/Mid/Side)
- Multiple monitor modes (Stereo/Left/Right/Mid/Side)
- In-place or centered monitoring
- Adjustable output level
- Loudness dim function
- Large and easy to use GUI
- 64-bit internal processing

http://www.tb-software.com/TBProAudio/ISOL8.html

Noisebud Chokidar EQ

Chokidar EQBalancing Mastering EQ

Chokidar EQ is intended for balancing mixes in mastering. Chokidar is build from an ingenious analogue concept that would have knocked your socks of if it wasn’t for the amount of added noise. When we went through the blue prints for the analogue circuits we realized that it would be fairly easy to make a digital version that would be completely noise free (digital “cabling” is good that way) so we went ahead and created the Hi-Shelf filter at first and got stunned how good it was. The principle seemed to migrate really well into the digital world so we decided to build the whole damn thing. You can almost guess what it does by just listen to it and you might as well do that because we’re going to keep the concept a secret, at least for now.


http://www.noisebud.se?page_id=12620

TBPro Audio

AB_LM is a a gain control which enables level matched and sample accurate A/B comparison of FX chains.
- how to:
http://www.learndigitalaudio.com/ab-level-matching-tutorial-using-free-plug-ins


sTilt is a linear phase filter which tilts the audio spectrum around a given center frequency.

gEQ12 is a 12 band stereo/MS graphic equalizer with accurate spectrum analyzer and minimum/linear phase modes.

dpMeter is a precise digital audio multi channel meter including RMS, EBUR128 and TruePeak measurement.

LA xLimit is an advanced look ahead, wideband linked-stereo limiter including ISP (inter sample peak) detection and oversampling.

etc...

http://www.tb-software.com/TBProAudio/products.html

MHORSE P3

Parallel Mastering Processor By Terry West
Functions:
* Full Bypass.
* EQ Bypass.
* In/Output -3dB option.
* 3 parallel parametric (serial) equalizers.
* 6 Q bandwidth settings per band.
* 4 freq. for low, mid, high.
* Boost/cut option per band.
* Peak/LoShelf - Peak/HiShelf.
* Loudness boost filter.
* Combined Par/Ser EQ option (post ser).
* Special filters: Mellow, Punch, Body and Shine (39K) modes.
* MS Parallel Clarity processor.
* NY Parallel Compressor.
* NY Solo, link/unlink channels, Motown & Aural enhancer.
* 3 bands Parallel Tape Saturator.
* DC remover.
* MS Parallel Stereo Widener without loss off center (3 modes).
* CrossTalk emulator (2 modes: Vintage, Modern).
* Low / High Exciters.
* Unique Deharsh processor with Stereo/Mid/Side modes.
* Old style VU meters (-60dB~+6dB).
* VU lights on/off animation.
* Pan peak/correlation and Source material detector meters.
* Input/output 3-color peak leds.
* 3-color i/o headroom leds for low, mid, high.
* Effects energy/compress meters.
* Parallel/Serial switch.
* Tooltips.





http://www.kvraudio.com/forum/viewtopic.php?f=6&t=430186

Mastering Compressor VST Infinity

The strength of this compressor lies partly in parallel multi-compression in combination with sub selection.
The audio becomes wider, more dynamic and has a warm rounded tone that benefits low end (Sub tones).
Tube saturation can be added on top of mid/high frequencies to give more sparkle and focus.

www.stabrecordings.com/infinity_free_compressor_vst

MEQ-10

MEQ-10 it´s a 10 band equaliser with -12/+12dB on gain performance and 2 octaves bandwidth control, featuring 5 filter modes.

This plugin has a frequency analyser spectrum view that can be maximized featuring several options.

By using the maximized window of the frequency analiser, the user can toogle from a full mode, with both Left and Right spectrums, to just full/Left or full/Right, plus a split viewing where the window splits for both L/R spectrums.

MEQ-10 works as a SEND effect wich means it works as an Auxiliary in an hardware mixer receiving audio from any channel.

http://www.beatassist.eu/meq-10/

Free mastering software by Bedroom producers

http://bedroomproducersblog.com/2013/06/26/free-mastering-software/?utm_source=feedly