ATKBassPreamp

ATKBassPreamp is a bass preamp plugin, modeling the inverter input stage of a Fender Bassman followed by its tone stack.

The plugin is built with Audio TooKit and JUCE.

http://blog.audio-tk.com/2017/05/23/announcement-atkbasspreamp-1-0-0/

Spectrum Analyser

Plugin Developer BEN/SCHULZ has released a free multichannel spectrum analyser named Spectrum.

The spectra can be displayed in realtime or as a spectrogram and supports all the features one would expect from an audio spectrum analyser.

The free version features up to four channels. An upgrade to sixteen channels is available as well.

https://schulz.audio/products/spectrum/

MAX1

An automatic compressor with “intelligent” and variable release time and ratio settings.

The effect features an auto-release algorithm which conforms the compressor’s response to the characteristics of the processed signal. To make the workflow simpler than what is normally seen in a compressor, MAX1 features only the threshold, attack, and post gain (aka output volume) knobs, along with a soft clipper switch and a peak/RMS switch for the gain reduction and volume meters. In practice, this means that the user can simply load the plugin on a channel that needs to be compressed, adjust the threshold value to set the compression amount, and adjust the attack time to taste (depending on how much or little the transients need to be emphasized).

Control your peaks very easily or increase the energy and levels of your track or mix effortlessly.
Few controls but “Huge” sound!
The Plugin has accurate metering for both L/R input and output channels as well as Gain Gain Reduction Metering.
Great Presets to get you started on all types of material and also save your own presets.
When compressing a lot , just use the “Attack” knob to dial back the punch easily. Use the soft limit to make your tracks loud effortlessly and transparently.
Never Lose “Bass” when maximizing your mix or sounds, retain the character of your sounds with this transparent dynamics processor.
Easy Effortless Compression and Energy Maximization.

https://www.beatskillz.com/max1/

Transpire

Transpire is a transient processor. It can enhance or dampen the initial attack and the sustain (body) of sound. Transpire has been designed to work well with drums and percussion. It does not operate linearly, which means small transients are being affected relatively stronger than large transients. This is good for bringing up smaller details while not overloading on large hits. As a result, percussive tracks can sound more steady and controlled compared to traditional transient enhancers.

• Attack enhance or dampen.
• Sustain enhance or dampen.
• Sensitivity controls the amount of details which Transpire can process. Small sensitivity will suit better for non-percussive material.
• Output is hard clipped at -0.1dB.

http://sonic.supermaailma.net/plugins

http://sonic.supermaailma.net/plugins

Fetish compressor

Classic Fet Compressor/Limiter
Discrete design
Super-fast attack time
Input and output stage distortion
Improved input control
Selectable ratio

http://analogobsession.com/product/fetish/

Synsonic BD-909

The Synsonic BD-909 is a model of the TR-909 Bass Drum.

We have analysed the original circuit and created an accurately digital model.

There are also more soundshaping possibilities like distortion, noise decay, tune depth and hold and pitch.

http://synsonic-instruments.com/synsonic-bd-909/

Synsonic-Instruments BD-808

BD-808 Software-Plugin is useful for creating 808-style Bass Drum Sounds.
The underlying signal processing is based on a detailed analysis of the original 808 Bass Drum circuit.
With the MIDI-Control it is also possible to use the plugin as a Bass Synthesizer.
Originally the 808 Bass Drum has the following parameters for soundshaping:

• Accent: Strength of the drum sound
• Level: Output level
• Decay: Duration of the drum sound
• Tone: Amount of attack-click

Additionally the Synsonic Instruments BD-808 offers the following useful soundshaping possibilities:

• Tune: Tuning in halftones
• Fine: Tuning in cents
• LongDecay: Extends decay range
• MidiSync-Tune: Tune depends on played Midi-Note
• MidiSync-Accent: Accent depends on Velocity of played Midi-Note

With the MIDI Learn function you can assign any MIDI-Controller to a parameter of the Bass Drum.

http://synsonic-instruments.com/synsonic-bd-808/

Q3D

Emulation of the NTI Nightpro EQ3D rack mount equalizer.

NTI Nightpro EQ3D is a 6-band equalizer that is best known for its boost-only “air” band which was designed for adding sheen and sparkle to vocals. The EQ also features extremely wide Q on all bands, resulting in pleasing, musical sounding boosts. Volko Audio’s free Q3D plugin emulates these features while aiming for optimized performance with a very low CPU hit. It is also completely free to download and use (activation required), unlike its hardware counterpart which costs anywhere between $1,500 and $1,800 in used condition.

Q3D copies the values and curves of each band found on the original NTI Nightpro EQ3D equalizer. The first five bands are set to 10 Hz, 40 Hz, 160 Hz, 650 Hz, and 2.5 kHz, whereas the “air” band comes with five preset cutoff frequencies (2.5 kHz, 5 kHz, 10 kHz, 20 kHz, and 40 kHz).

https://www.volkoaudio.com/product/q3d-eq/

Vocal king

The Vocal-King plugin! It’s been my dream to make a Vocal Plugin. The idea of this plugin is to simply bring out the presence and clarity in vocals.

http://www.jhudstudio.com/free-plugins

DSP-2 VOCAL

DSP-2 is a high precision insert effect for vocal processing which includes an Intelligent Dynamic Processor, a saturator, a four band equalizer fixed on vocal key frequencies and a room emulator based on the Schroeder reverberator. DSP-2 has been designed to be an easy to understand solution for all your vocal processing needs.

FEATURES:

· Intelligent Dynamic Processor (IDP)
· Four different automatic operative modes:
· Selectable compression ratio
· Saturator with three different operation modes
· EQ fixed on vocal key frequencies
· Room emulator based on Schroeder reverb model
· Transparent increment of the perceived volume level
· High precision input/output VU-meter
· Low CPU usage
http://www.maxsynths.com/vst_dsp2.html#fane1-tab